Ordinary card holder but with built-in safety
The ID Cardholder works like a normal card holder, where you can insert a standard ID card or access control card. However, the ID Cardholder also has a discreet alarm button on the back. With the alarm button, you can discreetly trigger an alarm or call for assistance and send your position at the same time.
ZONITH’s ID card holder takes staff security to a higher level, as alarms can be triggered discreetly, anywhere, without the use of devices other than the card holder.
The ID Cardholder is positioned indoors with ZONITH Gateways. Read more about ZONITH Gateway here.
The ID Cardholder can also be used as a physical button for the ZONITH Smartphone app. If an alarm is raised, the phone’s GPS position will be sent. Read more about the ZONITH smartphone app here.
Distress alarm (alarm button)
The alarm button is discreetly located on the back of the ID Cardholder and hidden from everyone but the user. When the button is pressed, no one will notice.
The button has two functions. A long press of the button triggers an alarm (emergency call), while a double press can be used to call for assistance.
The ID Cardholder has a rechargeable battery that can be charged with a regular mobile phone charger. Typically 1-2 months pass between each charge.
A1 Alarm Button
The A1 Alarm Button is discreetly white and has such a small size that it can be worn in a neck strap or belt clip. A1 is waterproof and therefore suitable for tasks outside or in wet environments. The device is rechargeable and of course so discreet that it does not attract unwanted attention.
The panic button, like ZONITH’s other alarm buttons, has two functions. A long press of the button triggers an alarm (emergency call), while a double press can be used to call for assistance.
The A1 Alarm Button has a rechargeable battery that can be charged with an ordinary mobile phone charger. It takes typically 1-2 months between each charge.
The alarm button is positioned indoors with ZONITH Gateways. Read more about ZONITH Gateway here.
The alarm button can also be used as a physical button for the ZONITH Smartphone app. If an alarm is raised, the phone’s GPS position will be sent. Read more about the ZONITH smartphone app here.
Wireless alarm button for fixed mounting
Wireless alarm buttons intended for installation in meeting rooms, interview rooms, reception areas, shops, etc.
One or more wireless alarm buttons can be placed in each room. The wireless alarm buttons communicate with ZONITH Gateways which monitor and collect alarms from the alarm buttons.
The alarm buttons can be easily installed with 2 screws, double-sided tape or velcro. They are typically mounted under tables, on the wall or simply lie on a table.
The alarm buttons run on standard batteries and have an impressive battery life of 2-3 years. A message is sent when the battery is about to be used up.
If a button is pressed, an alarm will be immediately activated and colleagues or guards will be informed of exactly in which room the alarm has been triggered.
The alarm button, like ZONITH’s other buttons, has two functions. A long press of the button triggers an alarm (emergency call), while a double press can be used to call for assistance.
Read more about ZONITH Gateway here.
Interested? Contact our security specialists
Henrik Krag
Kristian Stiesmark
”Lige meget hvor du befinder dig eller arbejder, så vil ZONITH´s Personalesikringsløsning værne om dig.”